补充test_mql气动反号观测输出

PythonModels/systems/test_mql_computed.py

@@ -67,6 +67,23 @@ class TestMqlComputedGeometryRun:
         return len(self.output.data_paths)
 
 
+@dataclass(frozen=True)
+class TestMqlComputedPneumaticRelationsRun:
+    amesim_results: AmesimResults
+    observation_catalog: TestMqlObservationCatalog
+    output_schema: TestMqlOutputSchema
+    output: TestMqlValidatedOutput
+    comparison: TestMqlComparisonResult
+
+    @property
+    def sample_count(self) -> int:
+        return len(self.output.times)
+
+    @property
+    def signal_count(self) -> int:
+        return len(self.output.data_paths)
+
+
 @dataclass(frozen=True)
 class TestMqlComputedMechanicalRelationsRun:
     amesim_results: AmesimResults
@@ -172,6 +189,42 @@ def run_test_mql_computed_geometry(
     )
 
 
+def run_test_mql_computed_pneumatic_relations(
+    archive_path: Path,
+) -> TestMqlComputedPneumaticRelationsRun:
+    amesim_results = load_test_mql_amesim_results(archive_path)
+    observation_catalog = build_test_mql_observation_catalog(amesim_results)
+    output_schema = build_test_mql_output_schema(
+        amesim_results,
+        observation_catalog=observation_catalog,
+    )
+    output_series = {
+        **_compute_chamber_duplicate_series(amesim_results, observation_catalog),
+        **_compute_orifice_reversed_series(amesim_results, observation_catalog),
+    }
+    output_data_paths = tuple(output_series)
+    output = validate_test_mql_output(
+        times=amesim_results.times,
+        series_by_data_path=output_series,
+        schema=output_schema,
+        data_paths=output_data_paths,
+    )
+    comparison = compare_validated_test_mql_output(
+        times=output.times,
+        series_by_data_path=output.series_by_data_path,
+        schema=output_schema,
+        amesim_results=amesim_results,
+        data_paths=output.data_paths,
+    )
+    return TestMqlComputedPneumaticRelationsRun(
+        amesim_results=amesim_results,
+        observation_catalog=observation_catalog,
+        output_schema=output_schema,
+        output=output,
+        comparison=comparison,
+    )
+
+
 def run_test_mql_computed_mechanical_relations(
     archive_path: Path,
 ) -> TestMqlComputedMechanicalRelationsRun:
@@ -314,3 +367,33 @@ def _compute_zero_force_source_series(
         for alias in sorted(mechanical_assembly.zero_force_sources)
     }
 
+
+def _compute_chamber_duplicate_series(
+    amesim_results: AmesimResults,
+    observation_catalog: TestMqlObservationCatalog,
+) -> dict[str, tuple[float, ...]]:
+    series_by_data_path: dict[str, tuple[float, ...]] = {}
+    for binding in observation_catalog.chambers.bindings:
+        pressure_series = amesim_results.series(binding.pressure_path)
+        temperature_series = amesim_results.series(binding.temperature_path)
+        for duplicate_path in binding.pressure_duplicate_paths:
+            series_by_data_path[duplicate_path] = tuple(pressure_series)
+        for duplicate_path in binding.temperature_duplicate_paths:
+            series_by_data_path[duplicate_path] = tuple(temperature_series)
+    return series_by_data_path
+
+
+def _compute_orifice_reversed_series(
+    amesim_results: AmesimResults,
+    observation_catalog: TestMqlObservationCatalog,
+) -> dict[str, tuple[float, ...]]:
+    series_by_data_path: dict[str, tuple[float, ...]] = {}
+    for binding in observation_catalog.orifices.bindings:
+        series_by_data_path[binding.reversed_mass_flow_path] = tuple(
+            -value for value in amesim_results.series(binding.primary_mass_flow_path)
+        )
+        series_by_data_path[binding.reversed_enthalpy_flow_path] = tuple(
+            -value for value in amesim_results.series(binding.primary_enthalpy_flow_path)
+        )
+    return series_by_data_path
+

tests/test_test_mql_computed.py

@@ -7,6 +7,7 @@ from PythonModels.systems.test_mql_computed import (
     run_test_mql_computed_geometry,
     run_test_mql_computed_mechanical_relations,
     run_test_mql_computed_piston_geometry,
+    run_test_mql_computed_pneumatic_relations,
 )
 
 
@@ -110,6 +111,58 @@ class TestMqlComputedGeometryTests(unittest.TestCase):
         )
 
 
+class TestMqlComputedPneumaticRelationsTests(unittest.TestCase):
+    @classmethod
+    def setUpClass(cls) -> None:
+        cls.computed_run = run_test_mql_computed_pneumatic_relations(TEST_MQL_AME)
+
+    def test_computed_pneumatic_relations_outputs_schema_valid_series(self) -> None:
+        self.assertEqual(self.computed_run.sample_count, 1002)
+        self.assertEqual(self.computed_run.observation_catalog.chambers.fixed_count, 4)
+        self.assertEqual(self.computed_run.observation_catalog.chambers.variable_count, 8)
+        self.assertEqual(self.computed_run.observation_catalog.orifices.fixed_count, 8)
+        self.assertEqual(self.computed_run.observation_catalog.orifices.variable_count, 8)
+        self.assertEqual(self.computed_run.signal_count, 88)
+        self.assertEqual(len(self.computed_run.comparison.metrics), 88)
+        self.assertEqual(self.computed_run.output_schema.signal_count, 858)
+
+    def test_computed_pneumatic_relations_include_expected_paths(self) -> None:
+        paths = self.computed_run.output.data_paths
+
+        self.assertIn("press2@pn_c1_8", paths)
+        self.assertIn("temp2@pn_c1_8", paths)
+        self.assertIn("dm2@pn_orifice_18", paths)
+        self.assertIn("dh2@pn_orifice_18", paths)
+        self.assertEqual(len([path for path in paths if path.startswith("press")]), 28)
+        self.assertEqual(len([path for path in paths if path.startswith("temp")]), 28)
+        self.assertEqual(len([path for path in paths if path.startswith("dm")]), 16)
+        self.assertEqual(len([path for path in paths if path.startswith("dh")]), 16)
+
+    def test_computed_pneumatic_relations_match_amesim_exactly(self) -> None:
+        for data_path in self.computed_run.output.data_paths:
+            metric = self.computed_run.comparison.metric(data_path)
+            with self.subTest(data_path=data_path):
+                self.assertEqual(metric.max_abs_error, 0.0)
+
+    def test_computed_pneumatic_relations_final_samples_match_expected_values(self) -> None:
+        self.assertAlmostEqual(
+            self.computed_run.output.series("press2@pn_c1_8")[-1],
+            4310310.457796034,
+        )
+        self.assertAlmostEqual(
+            self.computed_run.output.series("temp2@pn_c1_8")[-1],
+            293.1143259012449,
+        )
+        self.assertAlmostEqual(
+            self.computed_run.output.series("dm2@pn_orifice_18")[-1],
+            -0.009097746783809915,
+        )
+        self.assertAlmostEqual(
+            self.computed_run.output.series("dh2@pn_orifice_18")[-1],
+            1.1281175640493923,
+        )
+
+
 class TestMqlComputedMechanicalRelationsTests(unittest.TestCase):
     @classmethod
     def setUpClass(cls) -> None: