接入test_mql PNVO孔口边界

PythonModels/systems/test_mql.py

@@ -3940,14 +3940,18 @@ class TestMqlSystem:
     def typed_node3_count(self) -> int:
         return len(self.node3_assembly)
 
-    def _pnl0003_line_for_node_port(self, node_alias: str, port_name: str):
+    def _pnl0003_spec_for_node_port(self, node_alias: str, port_name: str):
         for spec in self.pnl0003_assembly.specs:
             if spec.source_component == node_alias and spec.source_port == port_name:
-                return self.pnl0003_assembly.lines[spec.alias]
+                return spec
             if spec.target_component == node_alias and spec.target_port == port_name:
-                return self.pnl0003_assembly.lines[spec.alias]
+                return spec
         raise KeyError(f"No PNL0003 line attached to {node_alias}.{port_name}")
 
+    def _pnl0003_line_for_node_port(self, node_alias: str, port_name: str):
+        spec = self._pnl0003_spec_for_node_port(node_alias, port_name)
+        return self.pnl0003_assembly.lines[spec.alias]
+
     def _pnl00r_line_for_node_port(self, node_alias: str, port_name: str):
         for spec in self.pnl00r_assembly.specs:
             if spec.source_component == node_alias and spec.source_port == port_name:
@@ -4300,14 +4304,14 @@ class TestMqlSystem:
         resistance_boundary_pressure_pa: float,
         inlet_node_temperature_k: float = 293.15,
         resistance_boundary_temperature_k: float = 293.15,
-        pnl0003_port_2_mass_flow_kg_s: float = 0.0,
-        pnl0003_port_2_temperature_k: float = 293.15,
+        p4_boundary_pressure_pa: float = 15.3e6,
+        p4_boundary_temperature_k: float = 293.15,
     ):
         """Close a PNL0001 chamber segment with the real outlet PN3 node.
 
         The PN3 primary pressure/temperature is taken from the attached PNL0003
-        port-1 compliance. The PNL0003 port-2 side and the far side of PNL00R
-        remain prescribed boundaries until PNVO/P4 semantics are inserted.
+        port-1 compliance. The PNL0003 port-2 side is connected through the
+        real PNVO001 orifice to a prescribed P4 pressure boundary.
         """
         from PythonModels.components.amesim_pneumatic import (
             AmesimPneumaticOrifice,
@@ -4315,14 +4319,20 @@ class TestMqlSystem:
         )
         from PythonModels.systems.test_mql_closure import (
             TestMqlPneumaticBoundaryCondition,
-            TestMqlPneumaticFlowBoundaryCondition,
             TestMqlPn3NodeChamberSegmentClosure,
             TestMqlPn3NodeChamberSegmentComponents,
         )
 
         inlet_line = self.pnl0001_assembly.lines[spec.inlet_line_alias]
         outlet_line = self.pnl0001_assembly.lines[spec.outlet_line_alias]
-        node_line = self._pnl0003_line_for_node_port(spec.outlet_node_alias, "port_2")
+        node_line_spec = self._pnl0003_spec_for_node_port(spec.outlet_node_alias, "port_2")
+        node_line = self.pnl0003_assembly.lines[node_line_spec.alias]
+        node_orifice_alias = (
+            node_line_spec.target_component
+            if node_line_spec.source_component == spec.outlet_node_alias
+            else node_line_spec.source_component
+        )
+        node_orifice = self.pneumatic_assembly.variable_orifices[node_orifice_alias]
         node_resistance = self._pnl00r_line_for_node_port(
             spec.outlet_node_alias, "port_1"
         )
@@ -4346,6 +4356,7 @@ class TestMqlSystem:
                 outlet_line=outlet_line,
                 node_line=node_line,
                 node_resistance=node_resistance,
+                node_orifice=node_orifice,
                 node=node,
                 volume=volume,
                 inlet_orifice=inlet_orifice,
@@ -4360,9 +4371,9 @@ class TestMqlSystem:
                 pressure_pa=resistance_boundary_pressure_pa,
                 temperature_k=resistance_boundary_temperature_k,
             ),
-            pnl0003_port_2_flow=TestMqlPneumaticFlowBoundaryCondition(
-                mass_flow_kg_s=pnl0003_port_2_mass_flow_kg_s,
-                temperature_k=pnl0003_port_2_temperature_k,
+            p4_boundary=TestMqlPneumaticBoundaryCondition(
+                pressure_pa=p4_boundary_pressure_pa,
+                temperature_k=p4_boundary_temperature_k,
             ),
         )
 
@@ -4374,8 +4385,8 @@ class TestMqlSystem:
         resistance_boundary_pressure_pa: float,
         inlet_node_temperature_k: float = 293.15,
         resistance_boundary_temperature_k: float = 293.15,
-        pnl0003_port_2_mass_flow_kg_s: float = 0.0,
-        pnl0003_port_2_temperature_k: float = 293.15,
+        p4_boundary_pressure_pa: float = 15.3e6,
+        p4_boundary_temperature_k: float = 293.15,
         config: SolveIVPConfig | None = None,
         t_eval: list[float] | None = None,
     ):
@@ -4385,8 +4396,8 @@ class TestMqlSystem:
             resistance_boundary_pressure_pa=resistance_boundary_pressure_pa,
             inlet_node_temperature_k=inlet_node_temperature_k,
             resistance_boundary_temperature_k=resistance_boundary_temperature_k,
-            pnl0003_port_2_mass_flow_kg_s=pnl0003_port_2_mass_flow_kg_s,
-            pnl0003_port_2_temperature_k=pnl0003_port_2_temperature_k,
+            p4_boundary_pressure_pa=p4_boundary_pressure_pa,
+            p4_boundary_temperature_k=p4_boundary_temperature_k,
         )
         run_config = config or SolveIVPConfig(t_stop=1.0e-4, max_step=1.0e-5)
         return integrate_ode(

PythonModels/systems/test_mql_closure.py

@@ -90,17 +90,6 @@ class TestMqlPneumaticBoundaryCondition:
         )
 
 
-@dataclass(frozen=True)
-class TestMqlPneumaticFlowBoundaryCondition:
-    mass_flow_kg_s: float
-    temperature_k: float = 293.15
-
-    def connected_enthalpy(self, gas: AmesimPneumaticGas) -> float:
-        if self.temperature_k <= 0.0:
-            raise ValueError("flow boundary temperature must be positive")
-        return gas.specific_enthalpy(self.temperature_k)
-
-
 @dataclass(frozen=True)
 class TestMqlPneumaticChamberSegmentComponents:
     volume: AmesimPneumaticVolume
@@ -167,6 +156,7 @@ class TestMqlPn3NodeChamberSegmentComponents:
     outlet_line: AmesimPnl0001Pipe
     node_line: AmesimPnl0003Pipe
     node_resistance: AmesimPnl00rPipe
+    node_orifice: AmesimPneumaticOrifice
     node: TestMqlPneumaticNode3
     volume: AmesimPneumaticVolume
     inlet_orifice: AmesimPneumaticOrifice
@@ -183,6 +173,7 @@ class TestMqlPn3NodeChamberSegmentSnapshot:
     node_line_port_2: ThermodynamicProperties
     inlet_node: ThermodynamicProperties
     resistance_boundary: ThermodynamicProperties
+    p4_boundary: ThermodynamicProperties
     node_balance: TestMqlPneumaticNode3Balance
     inlet_node_to_line_flow: float
     inlet_line_to_chamber_flow: float
@@ -191,8 +182,7 @@ class TestMqlPn3NodeChamberSegmentSnapshot:
     node_to_resistance_flow: float
     node_to_pnl0003_flow: float
     pnl0003_center_flow: float
-    pnl0003_port_2_flow: float
-    pnl0003_port_2_connected_h: float
+    pnl0003_to_p4_flow: float
 
 
 @dataclass(frozen=True)
@@ -550,6 +540,16 @@ class TestMqlPnl0001ChamberSegmentClosure:
         self._write_port_states(snapshot)
         return snapshot
 
+    @staticmethod
+    def _line_to_p4_flow(
+        *,
+        line: ThermodynamicProperties,
+        p4_boundary: ThermodynamicProperties,
+        orifice: AmesimPneumaticOrifice,
+    ) -> float:
+        upstream_temperature = line.T if line.p >= p4_boundary.p else p4_boundary.T
+        return orifice.mass_flow(line.p, p4_boundary.p, upstream_temperature)
+
     @staticmethod
     def _port(
         component: AmesimPneumaticVolume | AmesimPneumaticOrifice,
@@ -720,6 +720,16 @@ class TestMqlPnl0001PairChamberSegmentClosure:
         upstream_temperature = line.T if line.p >= chamber.p else chamber.T
         return orifice.mass_flow(line.p, chamber.p, upstream_temperature)
 
+    @staticmethod
+    def _line_to_p4_flow(
+        *,
+        line: ThermodynamicProperties,
+        p4_boundary: ThermodynamicProperties,
+        orifice: AmesimPneumaticOrifice,
+    ) -> float:
+        upstream_temperature = line.T if line.p >= p4_boundary.p else p4_boundary.T
+        return orifice.mass_flow(line.p, p4_boundary.p, upstream_temperature)
+
     @staticmethod
     def _port(
         component: AmesimPneumaticVolume | AmesimPneumaticOrifice,
@@ -844,12 +854,12 @@ class TestMqlPn3NodeChamberSegmentClosure:
         components: TestMqlPn3NodeChamberSegmentComponents,
         inlet_node: TestMqlPneumaticBoundaryCondition,
         resistance_boundary: TestMqlPneumaticBoundaryCondition,
-        pnl0003_port_2_flow: TestMqlPneumaticFlowBoundaryCondition,
+        p4_boundary: TestMqlPneumaticBoundaryCondition,
     ) -> None:
         self.components = components
         self.inlet_node = inlet_node
         self.resistance_boundary = resistance_boundary
-        self.pnl0003_port_2_flow = pnl0003_port_2_flow
+        self.p4_boundary = p4_boundary
 
     def initial_state_vector(self) -> list[float]:
         return [
@@ -882,6 +892,7 @@ class TestMqlPn3NodeChamberSegmentClosure:
         resistance_boundary = self.resistance_boundary.properties(
             self.components.node_resistance.gas
         )
+        p4_boundary = self.p4_boundary.properties(self.components.node_line.gas)
         inlet_node_to_line_flow = self.components.inlet_line.resistance_mass_flow(
             port_1_pressure_pa=inlet_node.p,
             port_1_temperature_k=inlet_node.T,
@@ -924,8 +935,10 @@ class TestMqlPn3NodeChamberSegmentClosure:
         )
         node_to_pnl0003_flow = -node_balance.port_2_mass_flow_g_s * 1.0e-3
         pnl0003_center_flow = self.components.node_line.resistance_mass_flow()
-        pnl0003_port_2_connected_h = self.pnl0003_port_2_flow.connected_enthalpy(
-            self.components.node_line.gas
+        pnl0003_to_p4_flow = self._line_to_p4_flow(
+            line=node_line_port_2,
+            p4_boundary=p4_boundary,
+            orifice=self.components.node_orifice,
         )
         snapshot = TestMqlPn3NodeChamberSegmentSnapshot(
             inlet_line=inlet_line,
@@ -935,6 +948,7 @@ class TestMqlPn3NodeChamberSegmentClosure:
             node_line_port_2=node_line_port_2,
             inlet_node=inlet_node,
             resistance_boundary=resistance_boundary,
+            p4_boundary=p4_boundary,
             node_balance=node_balance,
             inlet_node_to_line_flow=inlet_node_to_line_flow,
             inlet_line_to_chamber_flow=inlet_line_to_chamber_flow,
@@ -943,8 +957,7 @@ class TestMqlPn3NodeChamberSegmentClosure:
             node_to_resistance_flow=node_to_resistance_flow,
             node_to_pnl0003_flow=node_to_pnl0003_flow,
             pnl0003_center_flow=pnl0003_center_flow,
-            pnl0003_port_2_flow=self.pnl0003_port_2_flow.mass_flow_kg_s,
-            pnl0003_port_2_connected_h=pnl0003_port_2_connected_h,
+            pnl0003_to_p4_flow=pnl0003_to_p4_flow,
         )
         self._write_port_states(snapshot)
         return snapshot
@@ -962,6 +975,16 @@ class TestMqlPn3NodeChamberSegmentClosure:
             orifice=orifice,
         )
 
+    @staticmethod
+    def _line_to_p4_flow(
+        *,
+        line: ThermodynamicProperties,
+        p4_boundary: ThermodynamicProperties,
+        orifice: AmesimPneumaticOrifice,
+    ) -> float:
+        upstream_temperature = line.T if line.p >= p4_boundary.p else p4_boundary.T
+        return orifice.mass_flow(line.p, p4_boundary.p, upstream_temperature)
+
     @staticmethod
     def _port(
         component: AmesimPneumaticVolume | AmesimPneumaticOrifice,
@@ -1018,9 +1041,17 @@ class TestMqlPn3NodeChamberSegmentClosure:
         node_line.port_1.m_flow = snapshot.node_to_pnl0003_flow
         node_line.port_1.h_outflow = snapshot.node_line_port_1.h
         node_line.port_2.p = snapshot.node_line_port_2.p
-        node_line.port_2.m_flow = snapshot.pnl0003_port_2_flow
+        node_line.port_2.m_flow = -snapshot.pnl0003_to_p4_flow
         node_line.port_2.h_outflow = snapshot.node_line_port_2.h
 
+        node_orifice = self.components.node_orifice
+        node_orifice.port_a.p = snapshot.node_line_port_2.p
+        node_orifice.port_a.m_flow = snapshot.pnl0003_to_p4_flow
+        node_orifice.port_a.h_outflow = snapshot.node_line_port_2.h
+        node_orifice.port_b.p = snapshot.p4_boundary.p
+        node_orifice.port_b.m_flow = -snapshot.pnl0003_to_p4_flow
+        node_orifice.port_b.h_outflow = snapshot.p4_boundary.h
+
         resistance = self.components.node_resistance
         resistance.port_1.p = snapshot.node_line_port_1.p
         resistance.port_1.m_flow = snapshot.node_to_resistance_flow
@@ -1064,8 +1095,8 @@ class TestMqlPn3NodeChamberSegmentClosure:
             self.components.node_line.derivatives_from_connections(
                 port_1_m_flow=snapshot.node_to_pnl0003_flow,
                 connected_h_1=snapshot.node_line_port_1.h,
-                port_2_m_flow=snapshot.pnl0003_port_2_flow,
-                connected_h_2=snapshot.pnl0003_port_2_connected_h,
+                port_2_m_flow=-snapshot.pnl0003_to_p4_flow,
+                connected_h_2=snapshot.p4_boundary.h,
             )
         )
         return [

tests/test_test_mql_pnl0001_segment.py

@@ -168,6 +168,7 @@ class TestMqlPn3NodeChamberSegmentTests(unittest.TestCase):
         self.assertEqual(closure.components.outlet_line.name, "pneumatic_97")
         self.assertEqual(closure.components.node_line.name, "pneumatic_88")
         self.assertEqual(closure.components.node_resistance.name, "pneumatic_100")
+        self.assertEqual(closure.components.node_orifice.name, "pn_morifice_9")
         self.assertEqual(closure.components.node.alias, "pn_node3_9")
         self.assertEqual(len(closure.initial_state_vector()), 10)
         self.assertEqual(len(rhs), 10)
@@ -185,6 +186,7 @@ class TestMqlPn3NodeChamberSegmentTests(unittest.TestCase):
             self.spec,
             inlet_node_pressure_pa=15.3e6,
             resistance_boundary_pressure_pa=15.0e6,
+            p4_boundary_pressure_pa=15.0e6,
         )
         state = closure.initial_state_vector()
         state[4] *= 0.99
@@ -204,16 +206,21 @@ class TestMqlPn3NodeChamberSegmentTests(unittest.TestCase):
             snapshot.node_to_pnl0003_flow,
             -(snapshot.outlet_node_to_line_flow + snapshot.node_to_resistance_flow),
         )
+        self.assertGreater(snapshot.pnl0003_to_p4_flow, 0.0)
         self.assertAlmostEqual(
             closure.components.node_line.port_1.m_flow,
             snapshot.node_to_pnl0003_flow,
         )
+        self.assertAlmostEqual(
+            closure.components.node_line.port_2.m_flow,
+            -snapshot.pnl0003_to_p4_flow,
+        )
         mass_derivative_sum = rhs[0] + rhs[2] + rhs[4] + rhs[6] + rhs[8]
         self.assertAlmostEqual(
             mass_derivative_sum,
             (
                 snapshot.inlet_node_to_line_flow
-                + snapshot.pnl0003_port_2_flow
+                - snapshot.pnl0003_to_p4_flow
                 - snapshot.node_to_resistance_flow
             ),
             delta=1.0e-12,
@@ -224,6 +231,7 @@ class TestMqlPn3NodeChamberSegmentTests(unittest.TestCase):
             self.spec,
             inlet_node_pressure_pa=15.31e6,
             resistance_boundary_pressure_pa=15.29e6,
+            p4_boundary_pressure_pa=15.29e6,
             config=SolveIVPConfig(
                 t_start=0.0,
                 t_stop=1.0e-8,