接入test_mql PN3节点管路闭合

PythonModels/systems/test_mql.py

@@ -3940,6 +3940,22 @@ class TestMqlSystem:
     def typed_node3_count(self) -> int:
         return len(self.node3_assembly)
 
+    def _pnl0003_line_for_node_port(self, node_alias: str, port_name: str):
+        for spec in self.pnl0003_assembly.specs:
+            if spec.source_component == node_alias and spec.source_port == port_name:
+                return self.pnl0003_assembly.lines[spec.alias]
+            if spec.target_component == node_alias and spec.target_port == port_name:
+                return self.pnl0003_assembly.lines[spec.alias]
+        raise KeyError(f"No PNL0003 line attached to {node_alias}.{port_name}")
+
+    def _pnl00r_line_for_node_port(self, node_alias: str, port_name: str):
+        for spec in self.pnl00r_assembly.specs:
+            if spec.source_component == node_alias and spec.source_port == port_name:
+                return self.pnl00r_assembly.lines[spec.alias]
+            if spec.target_component == node_alias and spec.target_port == port_name:
+                return self.pnl00r_assembly.lines[spec.alias]
+        raise KeyError(f"No PNL00R line attached to {node_alias}.{port_name}")
+
     def pneumatic_state_vector(self) -> list[float]:
         return self.network.initial_state_vector()
 
@@ -4276,6 +4292,110 @@ class TestMqlSystem:
             t_eval=t_eval,
         )
 
+    def pn3_node_chamber_segment_closure_from_spec(
+        self,
+        spec,
+        *,
+        inlet_node_pressure_pa: float,
+        resistance_boundary_pressure_pa: float,
+        inlet_node_temperature_k: float = 293.15,
+        resistance_boundary_temperature_k: float = 293.15,
+        pnl0003_port_2_mass_flow_kg_s: float = 0.0,
+        pnl0003_port_2_temperature_k: float = 293.15,
+    ):
+        """Close a PNL0001 chamber segment with the real outlet PN3 node.
+
+        The PN3 primary pressure/temperature is taken from the attached PNL0003
+        port-1 compliance. The PNL0003 port-2 side and the far side of PNL00R
+        remain prescribed boundaries until PNVO/P4 semantics are inserted.
+        """
+        from PythonModels.components.amesim_pneumatic import (
+            AmesimPneumaticOrifice,
+            AmesimPneumaticVolume,
+        )
+        from PythonModels.systems.test_mql_closure import (
+            TestMqlPneumaticBoundaryCondition,
+            TestMqlPneumaticFlowBoundaryCondition,
+            TestMqlPn3NodeChamberSegmentClosure,
+            TestMqlPn3NodeChamberSegmentComponents,
+        )
+
+        inlet_line = self.pnl0001_assembly.lines[spec.inlet_line_alias]
+        outlet_line = self.pnl0001_assembly.lines[spec.outlet_line_alias]
+        node_line = self._pnl0003_line_for_node_port(spec.outlet_node_alias, "port_2")
+        node_resistance = self._pnl00r_line_for_node_port(
+            spec.outlet_node_alias, "port_1"
+        )
+        node = self.node3_assembly[spec.outlet_node_alias]
+        volume = self.network.components[spec.volume_alias]
+        inlet_orifice = self.network.components[spec.inlet_orifice_alias]
+        outlet_orifice = self.network.components[spec.outlet_orifice_alias]
+        if not isinstance(volume, AmesimPneumaticVolume):
+            raise TypeError(f"{spec.volume_alias} is not an AMESim pneumatic volume")
+        if not isinstance(inlet_orifice, AmesimPneumaticOrifice):
+            raise TypeError(
+                f"{spec.inlet_orifice_alias} is not an AMESim pneumatic orifice"
+            )
+        if not isinstance(outlet_orifice, AmesimPneumaticOrifice):
+            raise TypeError(
+                f"{spec.outlet_orifice_alias} is not an AMESim pneumatic orifice"
+            )
+        return TestMqlPn3NodeChamberSegmentClosure(
+            components=TestMqlPn3NodeChamberSegmentComponents(
+                inlet_line=inlet_line,
+                outlet_line=outlet_line,
+                node_line=node_line,
+                node_resistance=node_resistance,
+                node=node,
+                volume=volume,
+                inlet_orifice=inlet_orifice,
+                outlet_orifice=outlet_orifice,
+                spec=spec,
+            ),
+            inlet_node=TestMqlPneumaticBoundaryCondition(
+                pressure_pa=inlet_node_pressure_pa,
+                temperature_k=inlet_node_temperature_k,
+            ),
+            resistance_boundary=TestMqlPneumaticBoundaryCondition(
+                pressure_pa=resistance_boundary_pressure_pa,
+                temperature_k=resistance_boundary_temperature_k,
+            ),
+            pnl0003_port_2_flow=TestMqlPneumaticFlowBoundaryCondition(
+                mass_flow_kg_s=pnl0003_port_2_mass_flow_kg_s,
+                temperature_k=pnl0003_port_2_temperature_k,
+            ),
+        )
+
+    def simulate_pn3_node_chamber_segment_from_spec(
+        self,
+        spec,
+        *,
+        inlet_node_pressure_pa: float,
+        resistance_boundary_pressure_pa: float,
+        inlet_node_temperature_k: float = 293.15,
+        resistance_boundary_temperature_k: float = 293.15,
+        pnl0003_port_2_mass_flow_kg_s: float = 0.0,
+        pnl0003_port_2_temperature_k: float = 293.15,
+        config: SolveIVPConfig | None = None,
+        t_eval: list[float] | None = None,
+    ):
+        closure = self.pn3_node_chamber_segment_closure_from_spec(
+            spec,
+            inlet_node_pressure_pa=inlet_node_pressure_pa,
+            resistance_boundary_pressure_pa=resistance_boundary_pressure_pa,
+            inlet_node_temperature_k=inlet_node_temperature_k,
+            resistance_boundary_temperature_k=resistance_boundary_temperature_k,
+            pnl0003_port_2_mass_flow_kg_s=pnl0003_port_2_mass_flow_kg_s,
+            pnl0003_port_2_temperature_k=pnl0003_port_2_temperature_k,
+        )
+        run_config = config or SolveIVPConfig(t_stop=1.0e-4, max_step=1.0e-5)
+        return integrate_ode(
+            rhs=lambda t, state: closure.rhs(state),
+            initial_state=closure.initial_state_vector(),
+            config=run_config,
+            t_eval=t_eval,
+        )
+
     def pneumatic_branch_closure_from_spec(self, spec):
         return self.pneumatic_branch_closure(
             name=spec.name,

PythonModels/systems/test_mql_closure.py

@@ -8,10 +8,18 @@ from PythonModels.components.amesim_pneumatic import (
     AmesimPneumaticOrifice,
     AmesimPneumaticVolume,
 )
-from PythonModels.components.amesim_pneumatic_line import AmesimPnl0001Pipe
+from PythonModels.components.amesim_pneumatic_line import (
+    AmesimPnl0001Pipe,
+    AmesimPnl0003Pipe,
+    AmesimPnl00rPipe,
+)
 from PythonModels.core.medium import ThermodynamicProperties
 from PythonModels.core.ports import PortState
 from PythonModels.core.state import VolumeState
+from PythonModels.systems.test_mql_nodes import (
+    TestMqlPneumaticNode3,
+    TestMqlPneumaticNode3Balance,
+)
 
 
 @dataclass(frozen=True)
@@ -82,6 +90,17 @@ class TestMqlPneumaticBoundaryCondition:
         )
 
 
+@dataclass(frozen=True)
+class TestMqlPneumaticFlowBoundaryCondition:
+    mass_flow_kg_s: float
+    temperature_k: float = 293.15
+
+    def connected_enthalpy(self, gas: AmesimPneumaticGas) -> float:
+        if self.temperature_k <= 0.0:
+            raise ValueError("flow boundary temperature must be positive")
+        return gas.specific_enthalpy(self.temperature_k)
+
+
 @dataclass(frozen=True)
 class TestMqlPneumaticChamberSegmentComponents:
     volume: AmesimPneumaticVolume
@@ -142,6 +161,40 @@ class TestMqlPnl0001PairChamberSegmentSnapshot:
     outlet_line_to_chamber_flow: float
 
 
+@dataclass(frozen=True)
+class TestMqlPn3NodeChamberSegmentComponents:
+    inlet_line: AmesimPnl0001Pipe
+    outlet_line: AmesimPnl0001Pipe
+    node_line: AmesimPnl0003Pipe
+    node_resistance: AmesimPnl00rPipe
+    node: TestMqlPneumaticNode3
+    volume: AmesimPneumaticVolume
+    inlet_orifice: AmesimPneumaticOrifice
+    outlet_orifice: AmesimPneumaticOrifice
+    spec: TestMqlPneumaticChamberSegmentSpec
+
+
+@dataclass(frozen=True)
+class TestMqlPn3NodeChamberSegmentSnapshot:
+    inlet_line: ThermodynamicProperties
+    chamber: ThermodynamicProperties
+    outlet_line: ThermodynamicProperties
+    node_line_port_1: ThermodynamicProperties
+    node_line_port_2: ThermodynamicProperties
+    inlet_node: ThermodynamicProperties
+    resistance_boundary: ThermodynamicProperties
+    node_balance: TestMqlPneumaticNode3Balance
+    inlet_node_to_line_flow: float
+    inlet_line_to_chamber_flow: float
+    outlet_node_to_line_flow: float
+    outlet_line_to_chamber_flow: float
+    node_to_resistance_flow: float
+    node_to_pnl0003_flow: float
+    pnl0003_center_flow: float
+    pnl0003_port_2_flow: float
+    pnl0003_port_2_connected_h: float
+
+
 @dataclass(frozen=True)
 class TestMqlPneumaticBranchComponents:
     name: str
@@ -774,3 +827,251 @@ class TestMqlPnl0001PairChamberSegmentClosure:
             *chamber_derivative.as_vector(),
             *outlet_derivative.as_vector(),
         ]
+
+
+class TestMqlPn3NodeChamberSegmentClosure:
+    """Boundary-reduced chamber segment closed by one real PN3 node.
+
+    ``pneumatic_88`` supplies the PN3 primary pressure/temperature from its
+    port-1 compliance. The node has no storage, so the sum of the port-1
+    PNL00R flow and port-3 PNL0001 flow is written as the opposite port-1
+    flow into the PNL0003 state.
+    """
+
+    def __init__(
+        self,
+        *,
+        components: TestMqlPn3NodeChamberSegmentComponents,
+        inlet_node: TestMqlPneumaticBoundaryCondition,
+        resistance_boundary: TestMqlPneumaticBoundaryCondition,
+        pnl0003_port_2_flow: TestMqlPneumaticFlowBoundaryCondition,
+    ) -> None:
+        self.components = components
+        self.inlet_node = inlet_node
+        self.resistance_boundary = resistance_boundary
+        self.pnl0003_port_2_flow = pnl0003_port_2_flow
+
+    def initial_state_vector(self) -> list[float]:
+        return [
+            *self.components.inlet_line.get_state_vector(),
+            *self.components.volume.get_state_vector(),
+            *self.components.outlet_line.get_state_vector(),
+            *self.components.node_line.get_state_vector(),
+        ]
+
+    def apply_state_vector(self, values: list[float]) -> None:
+        if len(values) != 10:
+            raise ValueError("PN3 node/chamber segment state vector requires ten values")
+        self.components.inlet_line.set_state_vector(values[:2])
+        self.components.volume.set_state_vector(values[2:4])
+        self.components.outlet_line.set_state_vector(values[4:6])
+        self.components.node_line.set_state_vector(values[6:])
+
+    def snapshot(
+        self,
+        state_vector: list[float] | None = None,
+    ) -> TestMqlPn3NodeChamberSegmentSnapshot:
+        if state_vector is not None:
+            self.apply_state_vector(state_vector)
+        inlet_line = self.components.inlet_line.properties()
+        chamber = self.components.volume.properties()
+        outlet_line = self.components.outlet_line.properties()
+        node_line_port_1 = self.components.node_line.properties_1()
+        node_line_port_2 = self.components.node_line.properties_2()
+        inlet_node = self.inlet_node.properties(self.components.inlet_line.gas)
+        resistance_boundary = self.resistance_boundary.properties(
+            self.components.node_resistance.gas
+        )
+        inlet_node_to_line_flow = self.components.inlet_line.resistance_mass_flow(
+            port_1_pressure_pa=inlet_node.p,
+            port_1_temperature_k=inlet_node.T,
+        )
+        outlet_node_to_line_flow = self.components.outlet_line.resistance_mass_flow(
+            port_1_pressure_pa=node_line_port_1.p,
+            port_1_temperature_k=node_line_port_1.T,
+        )
+        inlet_line_to_chamber_flow = self._line_to_chamber_flow(
+            line=inlet_line,
+            chamber=chamber,
+            orifice=self.components.inlet_orifice,
+        )
+        outlet_line_to_chamber_flow = self._line_to_chamber_flow(
+            line=outlet_line,
+            chamber=chamber,
+            orifice=self.components.outlet_orifice,
+        )
+        node_to_resistance_flow = self.components.node_resistance.mass_flow(
+            port_1_pressure_pa=node_line_port_1.p,
+            port_1_temperature_k=node_line_port_1.T,
+            port_2_pressure_pa=resistance_boundary.p,
+            port_2_temperature_k=resistance_boundary.T,
+        )
+        node_balance = self.components.node.balance(
+            port_2_temperature_k=node_line_port_1.T,
+            port_2_pressure_pa=node_line_port_1.p,
+            port_1_enthalpy_flow_w=self._enthalpy_flow_from_node(
+                flow_kg_s=node_to_resistance_flow,
+                node_h=node_line_port_1.h,
+                connected_h=resistance_boundary.h,
+            ),
+            port_1_mass_flow_g_s=node_to_resistance_flow * 1.0e3,
+            port_3_enthalpy_flow_w=self._enthalpy_flow_from_node(
+                flow_kg_s=outlet_node_to_line_flow,
+                node_h=node_line_port_1.h,
+                connected_h=outlet_line.h,
+            ),
+            port_3_mass_flow_g_s=outlet_node_to_line_flow * 1.0e3,
+        )
+        node_to_pnl0003_flow = -node_balance.port_2_mass_flow_g_s * 1.0e-3
+        pnl0003_center_flow = self.components.node_line.resistance_mass_flow()
+        pnl0003_port_2_connected_h = self.pnl0003_port_2_flow.connected_enthalpy(
+            self.components.node_line.gas
+        )
+        snapshot = TestMqlPn3NodeChamberSegmentSnapshot(
+            inlet_line=inlet_line,
+            chamber=chamber,
+            outlet_line=outlet_line,
+            node_line_port_1=node_line_port_1,
+            node_line_port_2=node_line_port_2,
+            inlet_node=inlet_node,
+            resistance_boundary=resistance_boundary,
+            node_balance=node_balance,
+            inlet_node_to_line_flow=inlet_node_to_line_flow,
+            inlet_line_to_chamber_flow=inlet_line_to_chamber_flow,
+            outlet_node_to_line_flow=outlet_node_to_line_flow,
+            outlet_line_to_chamber_flow=outlet_line_to_chamber_flow,
+            node_to_resistance_flow=node_to_resistance_flow,
+            node_to_pnl0003_flow=node_to_pnl0003_flow,
+            pnl0003_center_flow=pnl0003_center_flow,
+            pnl0003_port_2_flow=self.pnl0003_port_2_flow.mass_flow_kg_s,
+            pnl0003_port_2_connected_h=pnl0003_port_2_connected_h,
+        )
+        self._write_port_states(snapshot)
+        return snapshot
+
+    @staticmethod
+    def _line_to_chamber_flow(
+        *,
+        line: ThermodynamicProperties,
+        chamber: ThermodynamicProperties,
+        orifice: AmesimPneumaticOrifice,
+    ) -> float:
+        return TestMqlPnl0001PairChamberSegmentClosure._line_to_chamber_flow(
+            line=line,
+            chamber=chamber,
+            orifice=orifice,
+        )
+
+    @staticmethod
+    def _port(
+        component: AmesimPneumaticVolume | AmesimPneumaticOrifice,
+        port_name: str,
+    ) -> PortState:
+        return TestMqlPneumaticChamberSegmentClosure._port(component, port_name)
+
+    @staticmethod
+    def _enthalpy_flow_from_node(
+        *,
+        flow_kg_s: float,
+        node_h: float,
+        connected_h: float,
+    ) -> float:
+        return flow_kg_s * (node_h if flow_kg_s >= 0.0 else connected_h)
+
+    def _write_port_states(
+        self,
+        snapshot: TestMqlPn3NodeChamberSegmentSnapshot,
+    ) -> None:
+        spec = self.components.spec
+        chamber = self.components.volume
+        chamber_inlet_port = self._port(chamber, spec.volume_inlet_port)
+        chamber_outlet_port = self._port(chamber, spec.volume_outlet_port)
+
+        TestMqlPnl0001PairChamberSegmentClosure._write_line_side(
+            self,
+            line=self.components.inlet_line,
+            line_properties=snapshot.inlet_line,
+            node_properties=snapshot.inlet_node,
+            node_to_line_flow=snapshot.inlet_node_to_line_flow,
+            line_to_chamber_flow=snapshot.inlet_line_to_chamber_flow,
+            orifice=self.components.inlet_orifice,
+            orifice_boundary_port=spec.inlet_orifice_boundary_port,
+            orifice_volume_port=spec.inlet_orifice_volume_port,
+            chamber_port=chamber_inlet_port,
+            chamber_properties=snapshot.chamber,
+        )
+        TestMqlPnl0001PairChamberSegmentClosure._write_line_side(
+            self,
+            line=self.components.outlet_line,
+            line_properties=snapshot.outlet_line,
+            node_properties=snapshot.node_line_port_1,
+            node_to_line_flow=snapshot.outlet_node_to_line_flow,
+            line_to_chamber_flow=snapshot.outlet_line_to_chamber_flow,
+            orifice=self.components.outlet_orifice,
+            orifice_boundary_port=spec.outlet_orifice_boundary_port,
+            orifice_volume_port=spec.outlet_orifice_volume_port,
+            chamber_port=chamber_outlet_port,
+            chamber_properties=snapshot.chamber,
+        )
+        node_line = self.components.node_line
+        node_line.port_1.p = snapshot.node_line_port_1.p
+        node_line.port_1.m_flow = snapshot.node_to_pnl0003_flow
+        node_line.port_1.h_outflow = snapshot.node_line_port_1.h
+        node_line.port_2.p = snapshot.node_line_port_2.p
+        node_line.port_2.m_flow = snapshot.pnl0003_port_2_flow
+        node_line.port_2.h_outflow = snapshot.node_line_port_2.h
+
+        resistance = self.components.node_resistance
+        resistance.port_1.p = snapshot.node_line_port_1.p
+        resistance.port_1.m_flow = snapshot.node_to_resistance_flow
+        resistance.port_1.h_outflow = snapshot.node_line_port_1.h
+        resistance.port_2.p = snapshot.resistance_boundary.p
+        resistance.port_2.m_flow = -snapshot.node_to_resistance_flow
+        resistance.port_2.h_outflow = snapshot.resistance_boundary.h
+
+    def rhs(self, state_vector: list[float]) -> list[float]:
+        snapshot = self.snapshot(state_vector)
+        inlet_derivative = self.components.inlet_line.derivatives_from_connections(
+            port_1_m_flow=snapshot.inlet_node_to_line_flow,
+            connected_h_1=snapshot.inlet_node.h,
+            port_2_m_flow=-snapshot.inlet_line_to_chamber_flow,
+            connected_h_2=snapshot.chamber.h,
+        )
+        outlet_derivative = self.components.outlet_line.derivatives_from_connections(
+            port_1_m_flow=snapshot.outlet_node_to_line_flow,
+            connected_h_1=snapshot.node_line_port_1.h,
+            port_2_m_flow=-snapshot.outlet_line_to_chamber_flow,
+            connected_h_2=snapshot.chamber.h,
+        )
+        chamber = self.components.volume
+        spec = self.components.spec
+        chamber_derivative = chamber.derivatives_from_two_connections(
+            port_a_m_flow=self._port(chamber, "port_1").m_flow,
+            connected_h_a=(
+                snapshot.inlet_line.h
+                if spec.volume_inlet_port == "port_1"
+                else snapshot.outlet_line.h
+            ),
+            port_b_m_flow=self._port(chamber, "port_2").m_flow,
+            connected_h_b=(
+                snapshot.inlet_line.h
+                if spec.volume_inlet_port == "port_2"
+                else snapshot.outlet_line.h
+            ),
+            internal_h=snapshot.chamber.h,
+        )
+        node_line_derivative_1, node_line_derivative_2 = (
+            self.components.node_line.derivatives_from_connections(
+                port_1_m_flow=snapshot.node_to_pnl0003_flow,
+                connected_h_1=snapshot.node_line_port_1.h,
+                port_2_m_flow=snapshot.pnl0003_port_2_flow,
+                connected_h_2=snapshot.pnl0003_port_2_connected_h,
+            )
+        )
+        return [
+            *inlet_derivative.as_vector(),
+            *chamber_derivative.as_vector(),
+            *outlet_derivative.as_vector(),
+            *node_line_derivative_1.as_vector(),
+            *node_line_derivative_2.as_vector(),
+        ]

tests/test_test_mql_pnl0001_segment.py

@@ -149,5 +149,94 @@ class TestMqlPnl0001PairChamberSegmentTests(unittest.TestCase):
         self.assertEqual([len(row) for row in solution.y], [3, 3, 3, 3, 3, 3])
 
 
+class TestMqlPn3NodeChamberSegmentTests(unittest.TestCase):
+    def setUp(self) -> None:
+        self.system = TestMqlSystem()
+        self.spec = self.system.discover_pneumatic_branch_topology().chamber_segment_specs[0]
+
+    def test_closure_replaces_outlet_boundary_with_real_pn3_node(self) -> None:
+        closure = self.system.pn3_node_chamber_segment_closure_from_spec(
+            self.spec,
+            inlet_node_pressure_pa=15.31e6,
+            resistance_boundary_pressure_pa=15.29e6,
+        )
+
+        snapshot = closure.snapshot()
+        rhs = closure.rhs(closure.initial_state_vector())
+
+        self.assertEqual(closure.components.inlet_line.name, "pneumatic_96")
+        self.assertEqual(closure.components.outlet_line.name, "pneumatic_97")
+        self.assertEqual(closure.components.node_line.name, "pneumatic_88")
+        self.assertEqual(closure.components.node_resistance.name, "pneumatic_100")
+        self.assertEqual(closure.components.node.alias, "pn_node3_9")
+        self.assertEqual(len(closure.initial_state_vector()), 10)
+        self.assertEqual(len(rhs), 10)
+        self.assertAlmostEqual(
+            snapshot.node_balance.pressure_pa,
+            snapshot.node_line_port_1.p,
+        )
+        self.assertAlmostEqual(
+            snapshot.node_balance.temperature_k,
+            snapshot.node_line_port_1.T,
+        )
+
+    def test_pn3_node_flow_cancels_between_adjacent_lines(self) -> None:
+        closure = self.system.pn3_node_chamber_segment_closure_from_spec(
+            self.spec,
+            inlet_node_pressure_pa=15.3e6,
+            resistance_boundary_pressure_pa=15.0e6,
+        )
+        state = closure.initial_state_vector()
+        state[4] *= 0.99
+        state[5] *= 0.99
+
+        snapshot = closure.snapshot(state)
+        rhs = closure.rhs(state)
+
+        self.assertGreater(snapshot.outlet_node_to_line_flow, 0.0)
+        self.assertGreater(snapshot.node_to_resistance_flow, 0.0)
+        self.assertAlmostEqual(
+            snapshot.node_balance.port_2_mass_flow_g_s,
+            (snapshot.outlet_node_to_line_flow + snapshot.node_to_resistance_flow)
+            * 1.0e3,
+        )
+        self.assertAlmostEqual(
+            snapshot.node_to_pnl0003_flow,
+            -(snapshot.outlet_node_to_line_flow + snapshot.node_to_resistance_flow),
+        )
+        self.assertAlmostEqual(
+            closure.components.node_line.port_1.m_flow,
+            snapshot.node_to_pnl0003_flow,
+        )
+        mass_derivative_sum = rhs[0] + rhs[2] + rhs[4] + rhs[6] + rhs[8]
+        self.assertAlmostEqual(
+            mass_derivative_sum,
+            (
+                snapshot.inlet_node_to_line_flow
+                + snapshot.pnl0003_port_2_flow
+                - snapshot.node_to_resistance_flow
+            ),
+            delta=1.0e-12,
+        )
+
+    def test_simulates_ten_state_pn3_node_chamber_segment(self) -> None:
+        solution = self.system.simulate_pn3_node_chamber_segment_from_spec(
+            self.spec,
+            inlet_node_pressure_pa=15.31e6,
+            resistance_boundary_pressure_pa=15.29e6,
+            config=SolveIVPConfig(
+                t_start=0.0,
+                t_stop=1.0e-8,
+                max_step=1.0e-9,
+            ),
+            t_eval=[0.0, 5.0e-9, 1.0e-8],
+        )
+
+        self.assertTrue(solution.success)
+        self.assertEqual(len(solution.t), 3)
+        self.assertEqual(len(solution.y), 10)
+        self.assertEqual([len(row) for row in solution.y], [3] * 10)
+
+
 if __name__ == "__main__":
     unittest.main()