校验test_mql机械观测量

AmesimModels/test_mql/README.md

@@ -92,12 +92,12 @@
   - 保留 AMESim alias 和对应 `Data_Path`，并把直径、刚度、阻尼、穿透距离等参数换算到 SI 单位。
 
 - `tests/test_test_mql_mechanical.py`
-  - 保护机械组件数量、活塞面积、质量端止动参数、载荷质量行程限制、弹性端止动参数、机械节点端口数和单位换算。
+  - 保护机械组件数量、活塞面积、质量端止动参数、载荷质量行程限制、弹性端止动参数、机械节点端口数、单位换算，以及 8 个活塞/8 个弹性端止动的 AMESim 末端样本对齐。
 
 - `PythonModels/components/amesim_mechanical.py`
   - 提供 AMESim 机械侧小原语，当前覆盖 `PNRP17` 活塞腔几何和 `LSTP00A` 弹性端止动接触力。
-  - 活塞腔长度、体积、体积变化率已用 `length@pn_brp2_8`、`vol1@pn_brp2_8`、`vvol1@pn_brp2_8` 的 AMESim 样本校验。
+  - 活塞腔长度、体积、体积变化率已用 `length@pn_brp2_*`、`vol1@pn_brp2_*`、`vvol1@pn_brp2_*` 的 AMESim 样本校验。
-  - 端止动接触力已按 `gap@elasticendstop_8`、`f1@elasticendstop_8` 和阻尼速度样本校验。
+  - 端止动接触力已按 `gap@elasticendstop_*`、`f1@elasticendstop_*` 和阻尼速度样本校验。
 
 - `tests/test_amesim_mechanical_components.py`
   - 保护机械原语单位换算、活塞几何、活塞体积变化率和弹性端止动接触力。

PythonModels/systems/test_mql_mechanical.py

@@ -3,6 +3,7 @@ from __future__ import annotations
 from dataclasses import dataclass
 
 from PythonModels.components.amesim_mechanical import (
+    AmesimElasticEndstop,
     AmesimPistonGeometry,
     circular_area,
     mm_to_m,
@@ -31,6 +32,13 @@ class TestMqlPistonSpec:
     annulus_area_m2: float
     data_paths: tuple[str, ...]
 
+    def geometry(self) -> AmesimPistonGeometry:
+        return AmesimPistonGeometry(
+            piston_diameter_m=self.piston_diameter_m,
+            rod_diameter_m=self.rod_diameter_m,
+            zero_length_m=self.zero_displacement_m,
+        )
+
 
 @dataclass(frozen=True)
 class TestMqlMassEndstopSpec:
@@ -58,6 +66,13 @@ class TestMqlElasticEndstopSpec:
     wire_diameter_m: float
     data_paths: tuple[str, ...]
 
+    def endstop(self) -> AmesimElasticEndstop:
+        return AmesimElasticEndstop(
+            contact_stiffness_n_per_m=self.contact_stiffness_n_per_m,
+            contact_damping_n_per_m_per_s=self.contact_damping_n_per_m_per_s,
+            gap0_m=self.gap_m,
+        )
+
 
 @dataclass(frozen=True)
 class TestMqlMechanicalNodeSpec:

tests/test_test_mql_mechanical.py

@@ -92,6 +92,45 @@ class TestMqlMechanicalAssemblyTests(unittest.TestCase):
         self.assertEqual(node.sum_mode, 1)
         self.assertIn("dynamic_mechanical_node_alternative_2", self.assembly.aliases)
 
+
+    def test_all_piston_geometry_observables_match_amesim_final_sample(self) -> None:
+        for alias, piston in self.assembly.pistons.items():
+            with self.subTest(alias=alias):
+                geometry = piston.geometry()
+                x4 = self.amesim_results.series(f"x4@{alias}")[-1]
+                x5 = self.amesim_results.series(f"x5@{alias}")[-1]
+                v4 = self.amesim_results.series(f"v4@{alias}")[-1]
+                v5 = self.amesim_results.series(f"v5@{alias}")[-1]
+
+                self.assertAlmostEqual(
+                    geometry.chamber_length_mm(x4, x5),
+                    self.amesim_results.series(f"length@{alias}")[-1],
+                )
+                self.assertAlmostEqual(
+                    geometry.chamber_volume_cm3(x4, x5),
+                    self.amesim_results.series(f"vol1@{alias}")[-1],
+                    delta=1.0e-6,
+                )
+                self.assertAlmostEqual(
+                    geometry.chamber_volume_rate_l_min(v4, v5),
+                    self.amesim_results.series(f"vvol1@{alias}")[-1],
+                    delta=1.0e-8,
+                )
+
+    def test_all_elastic_endstop_forces_match_amesim_final_sample(self) -> None:
+        for endstop_alias, endstop_spec in self.assembly.elastic_endstops.items():
+            piston_alias = endstop_alias.replace("elasticendstop", "pn_brp2")
+            with self.subTest(alias=endstop_alias):
+                endstop = endstop_spec.endstop()
+                gap_mm = self.amesim_results.series(f"gap@{endstop_alias}")[-1]
+                penetration_velocity_m_s = self.amesim_results.series(f"v5@{piston_alias}")[-1]
+
+                self.assertAlmostEqual(
+                    endstop.contact_force(gap_mm, penetration_velocity_m_s),
+                    self.amesim_results.series(f"f1@{endstop_alias}")[-1],
+                    delta=1.0e-3,
+                )
+
     def test_unit_helpers(self) -> None:
         self.assertAlmostEqual(mm_to_m(20.0), 0.02)
         self.assertAlmostEqual(n_per_mm_to_n_per_m(1.0e6), 1.0e9)